Skip to main content

Advances in radiated power control at DIII-D

Author(s): Eldon, D; Kolemen, Egemen; Humphreys, DA; Hyatt, AW; Järvinen, AE; et al

Download
To refer to this page use: http://arks.princeton.edu/ark:/88435/pr17z15
Full metadata record
DC FieldValueLanguage
dc.contributor.authorEldon, D-
dc.contributor.authorKolemen, Egemen-
dc.contributor.authorHumphreys, DA-
dc.contributor.authorHyatt, AW-
dc.contributor.authorJärvinen, AE-
dc.contributor.authorLeonard, AW-
dc.contributor.authorMcLean, AG-
dc.contributor.authorMoser, AL-
dc.contributor.authorPetrie, TW-
dc.contributor.authorWalker, ML-
dc.date.accessioned2020-04-01T13:22:27Z-
dc.date.available2020-04-01T13:22:27Z-
dc.date.issued2019en_US
dc.identifier.citationEldon, D, Kolemen, E, Humphreys, DA, Hyatt, AW, Järvinen, AE, Leonard, AW, McLean, AG, Moser, AL, Petrie, TW, Walker, ML. (2019). Advances in radiated power control at DIII-D. Nuclear Materials and Energy, 18 (285 - 290. doi:10.1016/j.nme.2019.01.010en_US
dc.identifier.urihttp://arks.princeton.edu/ark:/88435/pr17z15-
dc.description.abstractFeedback control of radiated power from the lower divertor P rad, div, L has been implemented in the DIII-D Plasma Control System (PCS). A realtime sensor for P rad, div, L has been constructed from 12 foil bolometer channels which agrees with standard post-shot analysis to within 20%. Results with the 12-channel sensor are compared to initial proof-of-concept tests with a single channel as a proxy for P rad, div, L , showing that the upgraded sensor is necessary to overcome limitations of the proxy channel strategy in DIII-D. Using N 2 seeding under feedback control, P rad, div, L has been increased by up to 150% above unseeded levels, and a radiated power fraction f rad of 80% has been demonstrated, although feedback controlled gas flow is steadier at f rad = 55%. Spatial coverage is broad enough to enable P rad control during the strike point sweeps which are commonly used to generate pseudo-2D divertor Thomson measurements in DIII-D divertor experiments. Use of this control reveals challenges that may affect next step devices, which will require actively controlled extrinsic impurity seeding in order to manage heat loads. When operating at high f rad , changes in pedestal T e (caused by ELMs in these experiments but could come from other disturbances) resulted in large perturbations to P rad which were destabilizing to the feedback controller.en_US
dc.format.extent285 - 290en_US
dc.language.isoen_USen_US
dc.relation.ispartofNuclear Materials and Energyen_US
dc.rightsFinal published version. This is an open access article.en_US
dc.titleAdvances in radiated power control at DIII-Den_US
dc.typeJournal Articleen_US
dc.identifier.doidoi:10.1016/j.nme.2019.01.010-
pu.type.symplectichttp://www.symplectic.co.uk/publications/atom-terms/1.0/journal-articleen_US

Files in This Item:
File Description SizeFormat 
Advances in radiated power control at DIII-D.pdf2.2 MBAdobe PDFView/Download


Items in OAR@Princeton are protected by copyright, with all rights reserved, unless otherwise indicated.